AshX 2 Stage DPF Cleaner 4L Kit – On-Vehicle Diesel Particulate Filter Cleaning Solution (Removes Soot, Carbon & Ash)

The Professional On-Vehicle DPF Cleaning Solution

AshX is a powerful 2-stage diesel particulate filter cleaner designed to remove soot, carbon, and ash buildup — restoring performance without costly removals.

Used by workshops and technicians, AshX delivers fast, effective results directly on the vehicle.

🔧 What’s Included

• ✅ Stage 1 – Active Cleaner (1L)
  Breaks down soot, carbon & loosens ash deposits
• ✅ Stage 2 – Flush & Mobiliser (1L)
  Flushes and removes remaining contamination

⚡ Key Benefits

• ✔ Restores exhaust gas flow
• ✔ Reduces DPF blockage & backpressure
• ✔ Safe for on-vehicle use
• ✔ No dismantling required
• ✔ Suitable for all diesel vehicles
• ✔ Leaves no harmful residues

🔥 STAGE 1 – ACTIVE CLEANING (BREAKS DOWN SOOT & PREPARES ASH RELEASE)

What it does
Stage 1 breaks down carbon, soot and oil-based contamination while beginning to loosen the ash that binds deep inside the DPF.

How it works
This stage penetrates into the DPF structure and weakens the bond between contamination and the filter walls.
It softens heavy deposits and disrupts the layers that trap non-combustible ash within the honeycomb.

Instead of just cleaning the surface, it prepares the entire filter for a proper deep clean.

Why it matters
Soot is only part of the problem.
Ash builds up over time and locks itself into the filter, causing long-term restriction.

Stage 1 starts the process of breaking that hold.

Workshop benefit

• Breaks down carbon, soot and oil contamination
• Loosens ash trapped deep within the DPF
• Prepares the system for full removal in Stage 2
• Reduces repeat blockage risk

💧 STAGE 2 – ASH REMOVAL & FLOW RESTORATION

What it does
Stage 2 is designed to remove the ash and contamination that Stage 1 has broken down — the part most cleaners leave behind.

How it works
This stage mobilises loosened ash particles and keeps them suspended, allowing them to move through the DPF and exit the system during the cleaning process.

It ensures that contamination is not just shifted around, but actually carried out of the filter.

Why it matters
Ash cannot be burned off during regeneration.
If it stays in the DPF, restriction builds back up and the problem returns.

Stage 2 is what turns a basic clean into a complete clean.

Workshop benefit

• Removes ash buildup, not just soot
• Restores exhaust flow and reduces backpressure
• Supports more effective regeneration
• Delivers longer-lasting results

⚡ WHY ASHX IS DIFFERENT

Most DPF cleaners focus on soot.
AshX is built to target ash — the real cause of long-term restriction.

Typical cleaners:

• Clean soot only
• Give short-term results
• Leave ash behind
• Lead to repeat faults

AshX system:

• Breaks down contamination and removes ash
• 2-stage process designed for full cleaning
• Targets the buildup regeneration cannot remove
• Built for professional workshop results

🧠 THE REAL TRUTH ABOUT DPF FAILURES

Soot burns off.
Ash does not.

Ash comes from oil additives and builds up over time, slowly blocking the DPF from the inside out.

That’s why vehicles keep coming back with the same issue.

AshX is engineered to tackle that problem directly.

💼 WORKSHOP ADVANTAGES

• Fewer repeat DPF jobs
• More complete cleans
• Stronger customer results
• Better long-term performance
• Increased confidence in your service

🔧 HOW IT FITS INTO YOUR WORKFLOW

1. Apply Stage 1 → breaks down soot and loosens ash
2. Allow soak time → deep contamination is released
3. Apply Stage 2 → removes ash and flushes system
4. Run vehicle / regeneration → clears remaining debris

Simple process. Proper results.